HEINE BETA® 4 USB Li-ion rechargeable handle

General Product Safety Regulation (GPSR)

Warning and safety instructions:

General Warnings

Use only CE marked USB power supplies (5 V) from reputable manufacturers that conform to the safety requirements from IEC 60601-1 Medical electrical equipment.
Check the correct operation of the device before use! Do not use the device if there are visible signs of damage.
Do not use the device in fire- or explosive risk area (e.g. oxygen saturated or anaesthetic environments) This product is not allowed to be entered or used in strong magnetic fields like MRI scanners.
Do not modify the device.
Use only original HEINE parts, spare parts, accessories and power sources.
Repairs shall only be carried out by qualified persons.
Turn the handle off during the charging process.
The handle is not designed for continuous use. The operating time of the handle depends on the maximum operating time of the examination head.

Precautions for HEINE rechargeable batteries

Do not put into fire, do not short-circuit, do not modify, do not sterilise, do not drop, do not expose to severe shocks or to direct sunlight.
Dispose of batteries in the event of visible or presumed damage (e.g. leaking liquid, mechanical damage).
The batteries can be damaged by liquid. They must not be rinsed in running water or submerged under water.After you checked the mains voltage, connect the switch mode power supply to the mains supply.
When taking the instrument out of service, proceed in reverse order.

General Warnings

Check the correct operation of the device before use! Do not use the device if there are visible signs of damage.
Do not use the device in fire- or explosive risk area (e.g. oxygen saturated or anaesthetic environments)
Do not modify the device.
Use only original HEINE parts, spare parts, accessories and power sources.
Repairs shall only be carried out by qualified persons.
The device must not be placed near strong Magnetic fields, e.g. MRI units.
Do not use the power supply outdoors.
The device must not be used with appliance outlets of extension leads.
The power supply is only approved for the use with ungrounded loads (Class II).
Before operating the device, verify that the mains voltage corresponds to the value indicated on the power supply.
Heating of the housing during operation is normal and harmless. Make sure that the device isn’t covered during operation, that it isn’t placed in close proximity to a heating and that isn’t exposed to direct sunlight.
Use this power supply only for the supply of the devices it is intended for.